This multifunctional tool can be used for many flexible sealants and caulks.
This Kit 5 helps to achieve clean profiles and permanent sealing. The Kit forming tools with 16 profile shapes. A releasing agent (soapy water) is not needed to apply the soft caulking mass (silicone).
Professional profiles only in 3 steps. Stripping knife with two different hardened metal blades. Removes old, leaky silicone and grout lines. Using masking tape and cleaning afterwards is no longer necessary.
Can be applied without leaving a greasy-film. Mistakes can be repaired by simply re-grouting. All pastes, silicone, acrylic and polyurethane can be applied as a sealant.
Use the absolutely smooth edge for spreading to get amazing finish. Work step by step, by only doing short distances at a time. The Kit can be used on all smooth, rough or wave-like surfaces.
When working on uneven surfaces push a little harder onto flexible edges. Swallow-tail tool for tight corners and hard to reach areas.
Step 1: Surfaces must be clean, dry and free from oil and dust;
Step 2: Fill the sealant / grout / silicone, than remove any excess sealant;
Step 3: Select a tool corner with the shape of seal you want to achieve;
Step 4: Run the tool slowly along the seal, always use the smooth side to trim the joints;
Step 5: Leaving the sealant to dry and cure
5 Tools - 16 different ways of use:
1 x 180°C angle
1 x 90°C angle
4 x 45°C angle (16, 10, 8, 5mm)
3 x concave grooves (R= 5, 10, 15mm)
7 x convex shapes (30, 25, 20, 15, 10, 8, 6 x 3mm)
When removing old mildew stained grouts or caulks, wear a protective mask (to avoid danger of infection). Use an anti-mildew treatment on the affected area. Be sure the surface you work on is dry and free or grease before restart caulking.